Reverb; Predelay - DigiTech GNX3000 Owner's Manual

Effects and Parameters
GNX3000 Owner' s Manual

Reverb

Reverb gives the listener a sense that the music is being performed in various
acoustical environments. It can provide the tight acoustics of a small room, or the
ambience of a huge arena.
Reverb On/Off
The STATUS button turns the Reverb (
Reverb Type
KNOB 1 selects the type of Reverb or acoustic environment. The GNX3000
provides ten different environments to choose from including:
studio
room
club
plate
hall
theater
church
garage
arena
spring

PreDelay

KNOB 2 adjusts the amount of time (
reach the first reflective surface in the simulated environment. Ranges from 0 to
15.
Decay
KNOB 3 adjusts the length of time the Reverb is audible (
to 99.
Damping
KNOB 4 controls the amount of sound which is absorbed (
simulated environment. Ranges from 0 to 99.
*Reverb Balance
The Reverb Balance adjusts the left/right balance of the Reverb signal. Ranges
from
rvb left 99
Reverb Level
KNOB 5 adjusts the level (
*This Parameter is only available using the X-Edit
74
reverb
= Studio
= Wood Room
= Club
= Plate
= Hall
= Amphitheater
= Church
= Parking Garage
= Arena
= Spring
PREDeLaY
to .
Rvb rght 99
) of the Reverb. Ranges from 0 to 99.
rvb levl
Editor/Librarian software.
TM
) on and off.
) it takes for the initial sound to
). Ranges from 0
DECAY
) in the
damping