Re-Amping A Guitar Track - DigiTech GNX3000 Owner's Manual

Using the GNX3000's Footswitches for Hands-Free

Re-Amping a Guitar Track

Using one of the Dry Guitar configurations for recording gives you the opportunity of playing a dry
take back into the GNX3000 for re-processing. The advantages of having this feature are you can
experiment playing the dry guitar take back through different amp models, effects, or entirely new
presets once you have your other tracks recorded. This helps when trying to fit a guitar sound into a
mix after the song is assembled rather than relying on tricky EQ settings that can tarnish the tone you
originally recorded.
To re-amp a track back through the GNX3000, follow these steps:
1. Put the GNX3000 into Record/Drum Mode by pressing the MODE button located on the
Control Panel or by pressing FOOTSWITCHES 4 and 5 simultaneously until the display flashes
rec/drum
2. From the Pro Tracks Plus menu bar, select File>New. The New Project File window will open.
3. Select the Normal-Hands Free Session project template.
4. Press the SHIFT and USB 1-2 SRC buttons, then use the DATA WHEEL to select
press the USB 3-4 SRC button and use the DATA WHEEL to select
5. Press the RECORD footswitch (FOOTSWITCH 3). The GNX3000's display reads record. A track
is automatically inserted in the current session of the Pro Tracks Plus software and recording on
this track begins.
6. To stop recording, press the STOP/UNDO footswitch (FOOTSWITCH 2). The GNX3000's display
reads stop and recording will stop. Press Stop again to rewind to the beginning of the track.
7. In the Out box of the track you just recorded, select B(Digitech USB 1-2 In/Out).
8. In the tool bar press the Console View button to see the mixing console.
GNX3000 Owner' s Manual
Computer Recording Functions
TM
.
114
dryguitr
.
usb off
. Then