Select And Adjust The Reverb - DigiTech GNX3000 Owner's Manual

Creating a Preset
1. Press Effect Select
GNX3000 Owner' s Manual

Select and Adjust the Reverb

In our example preset we wanted a little bit of Hall Reverb to provide some
ambience. To add the reverb, do the following:
1. Press the EFFECT SELECT DOWN button until the LED in the Reverb row lights.
2. If the display reads off (
( ).
On
3. Rotate KNOB 1 to select Hall (
4. Rotate KNOB 2 to set the Reverb Predelay to
5. Rotate KNOB 3 to set the Reverb Decay to
6. Rotate KNOB 4 to set the Reverb Damping to
7. Rotate KNOB 5 to set the Reverb Level to
Down again until the
Reverb LED lights
3. Rotate Knob 1
to select Hall as
the Reverb type
90
), press the STATUS button until the display reads on
Of
) for the Reverb Type.
Hall
2. Press the Status button to
turn on the Reverb
hall
4. Rotate Knob 2
to set the Reverb
PreDelay to 2
.
2
.
15
.
40
.
30
7. Rotate Knob 5
to set the Reverb
Level to 30
6. Rotate Knob 4
to set the Reverb
Damping to 40
5. Rotate Knob 3
to set the Reverb
Decay to 15