Table of Contents
Advertisement
Creating a Preset
GNX3000 Owner' s Manual
Select Channel 2 Amp and Cabinet
To assign the Rectified amp to the Channel 2 do the following:
1. Rotate KNOB 4 until the display reads
2. Rotate KNOB 5 until the display reads
1. Rotate Parameter 4 knob
until Display reads dualrect
Adjust Channel 1 Tone Controls
The Tweed amp that we selected for our Channel 1 assignment uses the factory
default settings for the Gain, EQ, and Level Parameters. Therefore, you may want
to change the settings. To access the tone controls for Channel 1, do the following:
1. Press the TONE Amp Control button.
2. Press the STATUS button until the display reads
horizontal LEDs will light green indicating that all 5 knobs will adjust Channel
1's tone controls.
3. Rotate KNOB 1 to adjust the Tweed Amp's Gain. The range is from 0 to 99.
1. Press the Tone Amp
Control button
3.-7. Rotate Parameter knobs to
4. Rotate KNOB 2 to adjust the Tweed Amp's Bass EQ Level (boost/cut). The
range is from -12 dB (
5. Rotate KNOB 3 to adjust the Tweed Amp's Midrange EQ Level(boost/cut). The
range is from -12 dB (
6. Rotate KNOB 4 to adjust the Tweed Amp's Treble EQ Level(boost/cut). The
range is from -12 dB (
7. Rotate KNOB 5 to adjust the Tweed Amp's Level. The range is from 0 to 99.
82
DualRect
brit4x12
2. Rotate Parameter 5 knob
until Display reads brit4x12
2. Press the Status button
until Display reads CH1 AMP
and all LEDs light green
adjust Channel 1's Gain, EQ Level,
and Amp Level
) to +12 dB (
).
-12
12
) to +12 dB (
).
-12
12
) to +12 dB (
).
-12
12
(Rectified).
(British 4x12).
and all the
ch1 amp
Advertisement
Table of Contents
