Table of Contents
Advertisement
Using the GNX3000's Footswitches for Hands-Free
GNX3000 Owner' s Manual
Computer Recording Functions
TM
Recording the GNX3000 Drums and MIDI
You can use MIDI drum files for playing the GNX3000 drum samples as long as
the events are mapped to the MIDI notes shown on page 128. The drum samples
of the GNX3000 only respond to MIDI messages transmitted on MIDI channel
10, which is the default channel for General MIDI drums.
For a complete list of the General MIDI Drum Samples see page 128.
MIDI and Recording
The GNX3000 features MIDI IN and OUT JACKS which serve several purposes:
1. MIDI IN can be used for remote control of the GNX3000 from external MIDI
devices such as MIDI sequencers and MIDI controller pedals (GNX3000
receives program changes, CC parameter control).
2. MIDI IN can be used as your MIDI interface to the computer allowing recording
of MIDI events to Pro Tracks Plus or other recording software applications via
USB.
3. MIDI OUT can be used as the MIDI out of your computer recording and
sequencer application for controlling external MIDI devices such as keyboards
or sound modules.
USB Playback Mix
The DATA WHEEL is an easy way to balance the GNX3000's processing with playback
from the Pro Tracks Plus
available when the GNX3000 is connected to the computer via USB and Pro Tracks
Plus is up and running. To change the USB Playback mix, follow these steps:
1. Start playback of a session from Pro Tracks Plus.
2. Press the SHIFT button then press the USB PLAY MIX button (both are located in
the Control Panel).
3. Turn the DATA WHEEL to balance the level of GNX3000 guitar processing and
playback level. When the display reads
GNX3000 GUITAR, MIC, and LINE INPUT signals will be heard. Rotating this
knob clockwise, you will begin to hear the playback level increase.
indicates the GNX3000/computer playback mix is a 50/50 mix of both
50
signals. Continuing to rotate the knob clockwise will decrease GNX3000 level.
GNX MIX 0
indicates that only playback from the computer will be heard.
When the GNX3000 is not connected to your computer via USB, the USB Playback
Mix parameter is hidden and returned to normal operating levels independent of USB.
If your GNX3000 is not connected to your computer and you press the SHIFT button
and then the USB PLAY MIX button, the GNX3000 will display
116
software using a single control. This function is only
TM
USB MIX 0
it indicates that only
GNX mix
.
NO USB
Advertisement
Table of Contents
