DigiTech GNX3000 Owner's Manual page 40

Computer Recording Setup
GNX3000 Owner' s Manual GNX3000 Owner' s Manual
4. Connect a keyboard, line level instrument, or stereo mixer (for feeding
submixes) to the GNX3000's LEFT and RIGHT LINE INPUTS. To adjust your line
input levels for optimal use see Line Level Optimization on page 26.
5. Connect a GNXFC Foot Controller (optional) to the GNX3000's Footswitch
jack.
6. Connect a MIDI keyboard to the GNX3000's MIDI IN and OUT/THRU jacks
using 5 Pin MIDI cables.
7. Press the GNX3000's OUTPUT SETUP button and select "
output mode using the DATA WHEEL.
8. Connect XLR cables from the GNX3000's LEFT and RIGHT XLR OUTPUTS
to powered studio monitors and set XLR Speaker Compensation to ON
(described on page 24).
9. Connect the GNX3000 to your computer's USB jack using the included USB
cable.
ATTENTION: Refer to the "Installing the GNX3000's Software Suite" section on page
101 before connecting the GNX3000 to the USB port on your PC and using Pro Tracks
Plus.
32 32
" as the
STEROALL