DigiTech GNX3000 Owner's Manual page 15

6. Connect the GNX3000 to your computer's USB JACK using the included USB
cable.
ATTENTION: Refer to the "Installing the GNX3000's Software Suite" section on page
101 before connecting the GNX3000 to the USB port on your PC and using Pro Tracks
Plus.
7. Connect a MIDI keyboard to the GNX3000's MIDI IN and OUT/THRU JACKS
using 5 Pin MIDI cables.
8. Press the GNX3000's OUTPUT SETUP button and select
output mode using the DATA WHEEL.
9. Turn Speaker Compensation on for the XLR OUTPUTS (see page 24).
See page 24 for more information about Speaker Compensation.
as the
STEROALL
7
GNX3000 Owner' s Manual
GNX3000 Owner' s Manual