Using The Gnx3000'S Footswitches For Hands-Free Computer Recording Functions; Recording A Track Or Tracks; Playing Back A Recorded Track; Track - DigiTech GNX3000 Owner's Manual

Using the GNX3000's Footswitches for Hands-Free
Using the GNX3000's Footswitches for Hands-Free
Computer Recording Functions
The GNX3000's FOOTSWITCHES are capable of controlling the Pro Tracks Plus
creating a Hands-Free recording interface. To do this, the GNX3000 must be connected to the
computer via the included USB cable and the Pro Tracks Plus
open.

Recording a Track or Tracks

To begin recording a track using the FOOTSWITCHES, follow these steps:
1. Start the Pro Tracks Plus application.
2. From the Pro Tracks Plus menu bar, select File>New. The New Project File window will appear.
3. From the New Project File window, select Normal - Hands-Free Session.
4. Put the GNX3000 into Record/Drum Mode by pressing the MODE button located on the
Control Panel or by pressing FOOTSWITCHES 4 and 5 simultaneously until the display flashes
rec/drum
5. Press the SHIFT and USB 1-2 SRC buttons, then use the DATA WHEEL to select the sources you'd
like to record. (Additional sources can be selected by pressing the USB 3-4 SRC button and
using the DATA WHEEL.)
6. Press the RECORD footswitch (FOOTSWITCH 3). The GNX3000's display reads record. A track
or tracks are automatically inserted in the current session of the Pro Tracks Plus software and
recording on these tracks begins.
7. To stop recording, press the STOP/UNDO footswitch (FOOTSWITCH 2). The GNX3000's display
reads stop and Pro Tracks Plus stops recording. The wave data for the track(s) can now be
viewed on your computer monitor.

Playing Back a Recorded Track

After a track or tracks have been recorded, playing them back is easy. If you want to start playback at
the beginning of a track or song but are someplace other than the end of the song, follow these steps:
1. Press the STOP/UNDO footswitch (FOOTSWITCH 2) once. The GNX3000 display will read
rewind. Pro Tracks Plus will rewind to the beginning of the current song.
2. Press the PLAY footswitch (FOOTSWITCH 4). The recorded track(s) will begin playing back.
GNX3000 Owner' s Manual
Computer Recording Functions
TM
Hands-Free
Stop/Undo
.
112
application must be installed and
TM
Footswitch Controls
TM
Record Play
TM
recording software,
TM