The Rear Panel - DigiTech GNX3000 Owner's Manual

The Rear Panel

1 2 3
1. Guitar/Instrument Input
Connect your guitar/instrument to this jack.
2. Mic Level
Controls the gain of the MIC INPUT preamp.
3. Microphone Input
Connect a low impedance microphone to this jack for recording vocals or acoustic
instruments. It can also be used for the Talker
page 57). The mic signal can remain dry or processed through the GNX3000's
effects for live and recording applications (see page 25 for more information). The
Microphone Input is equipped with built-in phantom power (which is always on)
for use with condenser or ribbon mics that require phantom power.
4. Left/Right Balanced Line Inputs
Connect line level sources to these jacks for recording or live performance
mixing into the GNX3000. Line signals can remain dry or be processed through
the GNX3000's effects for live and recording applications (see page 25 for more
information).
5. Output Level (1/4" Outputs Only)
Controls the overall volume level of the 1/4" OUTPUTS of the GNX3000.
6. Left/Right 1/4" Balanced Line Outputs
Connect these outputs to your guitar amplifier(s), power amplifier(s), or to a
mixing console that accepts 1/4" balanced connections.
7. Output Level (XLR and Headphone Outputs Only)
Controls the overall volume level of the balanced XLR and HEADPHONE OUTPUTS
of the GNX3000.
4 5 6 7
Vocoder effect (see Talker on
™
8 9 10 11 12 13
17 17
GNX3000 Owner' s Manual GNX3000 Owner' s Manual
14 15
GNX3000 Owner' s Manual GNX3000 Owner' s Manual