Recording A Loop (Free-Form) - DigiTech JamMan SOLO XT Owner's Manual

Once the tempo is established, record your loop and set the loop end point at the
end of a measure. If your timing was a little early or late, not to worry, the JamMan
Solo XT automatically adjusts the loop length to the measure length set by the Tempo
and Time Signature.
The JamMan Solo XT can record and playback loops up to 10 minutes long.
NOTE:

Recording a Loop (Free-Form)

Pedal Tempo Off (Default)/Auto Record Off (Default)
Select an empty memory location
1.
using the
<UP/DOWN>
( and
LOOP SINGLE
Press the
2. <PEDAL SWITCH>
initiate recording and begin playing.
As soon as you're done recording,
3.
press the
<PEDAL SWITCH>
to stop recording and initiate playback.
Quickly press the
twice to stop loop playback.
Press the
4. <STORE>
you wish to store the loop.
buttons
LEDs will be off).
to
again
<PEDAL SWITCH>
button twice if
15