9.2 Getting Ready
Adding a New One-Touch Dial Setting
1
Start up PageScope Light.
H
Refer to "Using PageScope Light" on page 9-10.
2
Log in to the Administrator mode.
3
Click "One-Touch Dial Setting" in the menu on the "Fax" tab.
4
Click the one-touch dial number where you wish to add a new address.
The One-Touch Registration screen appears.
5
Select "E-mail" from the drop-down list, and then click the [Apply]
button .
6
Enter the destination name and e-mail address below "E-mail
Destination", and then click the [Apply] button.
9
9-47