Direct Transmission - Konica Minolta FAX2900 User Manual

6.1 Transmission Methods
5
Using the 10-Key Pad, enter the
fax number of the recipient.
H The fax number of a previously
programmed recipient can also
be specified. Refer to "Dialing"
on page 5-2.
6
Press the [Start] key to begin scanning and sending the fax.
H To stop the transmission, press the [Stop] key.
Once transmission is finished, a beep is sounded.
If the fax could not be sent, the transmission result report is printed (p. 7-74).

Direct Transmission

If the Memory TX lamp is not lit, the direct transmission is selected. One page of the
document at a time can be scanned, according to the transmission status. This
ensures that even documents with many pages can be sent.
Note
If direct transmission is specified while a fax is being sent or received, the
transmission will be queued.
With direct transmission, multiple recipients cannot be specified.
Direct transmission and timer transmission cannot be performed at the same
time.
6
6-3