9
9.3.3
Specifying the Destination Using Speed Dial Numbers
Note
The speed dial setting must have already been specified.
For information on setting up speed dial numbers, refer to "Adding
Destinations" on page 9-41.
1
Press the [Speed Dial] key, and
then use the 10-key pad to enter the
3-digit speed dial number
programmed with the e-mail
address where you want to send the
scan data.
H
If you make a mistake, press the
[No] key, and then enter the
correct number.
9-64
9.3 Using Scan to E-mail Operations