Specifying F Codes; When Sending Faxes; Programming F Codes - Konica Minolta FAX2900 User Manual
Fax 2900/fax 3900 user guide
Hide thumbs
Also See for FAX2900:
- User manual (342 pages) ,
- Quick manual (12 pages) ,
- User manual (60 pages)
Table of Contents
Advertisement
6
Specifying F codes
When sending faxes
F codes can be specified when the 10-Key Pad is being used to enter the fax
number of a recipient while sending a fax.
1
Using the 10-Key Pad, enter the
fax number of the recipient.
2
Press the [
] key, and then use
the 10-Key Pad to enter the SUB.
H
A number up to 20 digits long
can be entered for the SUB.
H
To enter an SID, continue with
step 3.
H
If an SID will not be entered, continue with step 4.
3
Press the [
] key, and then use
the 10-Key Pad to enter the SID.
H
A number up to 20 digits long
can be entered for the SID.
4
Press the [Start] key to begin scanning and sending the fax.
Programming F codes
F codes can be specified when programming one-touch dial keys or speed dial
numbers.
For details on programming F codes, refer to "Setting Up the Fax Registration" on
page 7-25 in "7 Utility Mode".
6-28
6.3 Using F codes
Advertisement
Table of Contents
