Konica Minolta FAX2900 User Manual page 124

6.1 Transmission Methods
4
Press the [7] key from the 10-Key
Pad.
or
Press the [Function] key 7 times to
select "RELAY INITIATE", and
then press the [Yes] key.
5
Specify the relay station, and then
press the [Yes] key.
H Refer to "Dialing" on page 5-2.
A screen appears, allowing you to
specify the Relay Box ID.
6
Using the 10-Key Pad, enter the
Relay Box ID.
H Enter the Relay Box ID (20
digits or less) programmed at
the relay station.
H If you wish to correct the ID, press the [No] key, and then enter the new
number.
7
Press the [Yes] key.
A screen appears, allowing you to specify the password.
8
Using the 10-Key Pad, enter the
password.
H
Enter the password (20 digits
or less) if a password has been
set at the relay station.
H If you wish to correct the password, press the [No] key, and then enter the
new number.
9
Press the [Start] key to begin scanning and sending the fax.
FAX3900
FAX2900
6
6-15