Specifying The Setting For "No.of Rings; Specifying The Setting For "Reduction Rx - Konica Minolta FAX2900 User Manual

7

Specifying the Setting for "NO.of RINGS"

1
Select the "RX OPERATION".
H
Refer to "Selecting the "RX OPERATION" menu .
2
Press the [2] key from the 10-Key
Pad to select "NO.of RINGS".
3
Using the 10-Key Pad, enter the
desired number of rings, and then
press the [Yes] key.
H The number of rings can be set
between 1 and 16.
The "RX OPERATION" menu appears again.

Specifying the Setting for "REDUCTION RX"

1
Select the "RX OPERATION".
H Refer to "Selecting the "RX OPERATION" menu .
2
Press the [3] key from the 10-Key
Pad to select "REDUCTION RX".
3
Using the [ ] and [
select "ON" (print the document
reduced), "OFF" (split the printout)
or "CUT" (discard any excess),
and then press the [Yes] key.
The "RX OPERATION" menu appears again.
7-64
] keys,
7.8 Setting Up the Reception