Appendix A Specifications and features
The ETH682i Mezz network adapter (product model: NIC-ETH682i-Mb-2*25G) is a CNA module that
provides two 25-GE ports, each of which supports FCoE and FCoE boot. It can be applied to the
B16000 blade server chassis to provide network interfaces connecting blade servers to ICMs. The
network adapter exchanges data with blade servers by using PCIe 3.0 x8 channels and uses the two
25-GE ports to connect to the ICMs through the mid plane. It supports applications such as NIC,
iSCSI, and FCoE to help realize network convergence.
Figures in this section are for illustration only.
Network adapter view
The ETH682i Mezz network adapter can be applied to 2-processor half-width, 2-processor full-width,
and 4-processor full-width blade servers. For the installation positions of the network adapter, see
"Compatible blade
Figure 116 ETH682i Mezz network adapter
Specifications
Product specifications
Table 1 ETH682i Mezz network adapter product specifications
Item
Basic properties
Network adapter type
Chip model
Max power consumption
Input voltage
Bus type
servers."
Specifications
CNA
Marvell QL41262A-A2G
13 W
12 VDC
PCIe 3.0 x8
1