Model Select - FUTABA 12Z Series Instruction Manual

MODEL SELECT

This function is used to load the settings of the
desired model into the T12Z's memory.
The settings may be selected from either the
transmitter's built-in memory or a CFDP32M (Compact
Flash card; 32MB). Remember that up to 25 model
memories are available in the transmitter.
The name of the model stored in the transmitter and
the CF card may be changed. This can be very useful to
tell different models settings apart. Each model name
can be as long as 8 characters, and the model name
[Return Key]
Model call
*Model data saved at models other than the model currently
used or saved on a CF card can be called.
message ("TRANSMIT?") appears.
50 <Functions of Linkage Menu>
always appears in the display screen.
data into a second memory within the transmitter and
the CF card. It may be used for getting a head-start on
setting up models with almost the same settings (only
complete model from scratch). Also, this function may
be used to make a backup copy of a model setup before
any changes are made.
(Model list)
Model addition
The Copy function is used to copy one set of model
PUSH
*The display screen is an example. The screen
depends on the model type.
*A new model can be added to the transmitter memory or CF
card.
*The model type setup screen and frequency setup screen are
and frequency.
*A starting transmission with new model confirmation
message ("TRANSMIT") appears.
*The added model appears in the model list.
[Cursor Lever]
[Data Input Dial]
[Enter Button]