Table of Contents
Advertisement
5.
Once the PC is communicating with the HH1620, you can proceed to Section 3:
Configuration to access the built-in Web-based Configuration Utility and configure the
HH1620:
For a typical HH1620 configuration as a wired/wireless router, review and adjust as
necessary only those configuration options designated as "commonly used" or
"recommended". These fields are labeled with white letters.
For advanced HH1620 configuration, review and adjust any and all configuration
options as desired. Field codes requiring more advanced knowledge to configure
are labeled with black letters.
In either case, it is recommended that you first use the Web-based Configuration Utility
to establish security measures on your wireless network, and re-connect securely to the
HH1620, prior to making any other changes to the HH1620.
Configuring Computers to Communicate with the HH1620
Each computer that will be part of your network needs to communicate with the router. To do
this, you may need to configure each PC's network settings to automatically obtain an IP
address.
This section includes information on configuring computers with the following operating
systems:
Windows® 98SE
Windows Me®
Windows® 2000
Windows XP™
Determine the operating system for each computer you will include in your wireless network
and follow the steps to configure the network settings for that PC.
Configuring Windows 98SE and ME
1.
Select Start > Settings > Control Panel.
2.
Double-click Network. The Network window is displayed.
3.
On the Configuration tab, select the TCP/IP line the for the appropriate wired or
wireless Ethernet adapter on your PC. There may be multiple adapters installed –
choose only the one that is configured for your adapter. In the example above, a 3Com
Ethernet adapter card is installed and is the appropriate choice.
4 .
Click
Properties
. The TCP/IP Properties window is displayed.
HH1620 Wireless VoIP Gateway
User's Guide
19
Troubleshooting
Advertisement
Table of Contents
