Alarm Mode Setting Section; Periodical Recording Mode Setting Section - Sony Ipela SNT-V704 User Manual

mode, set the Suffix menu to Date/Time or
Sequence number.
Periodical recording:Records still images in the
selected memory periodically. When you select
Periodical recording, the Periodical recording
mode setting section appears (see page 55).
OK/Cancel
See "Buttons common to every setting page" on page
27.

Alarm mode setting Section

Alarm
Select the alarm to link the Image memory function. If
the selected alarm is detected, a still image is captured
and recorded in the selected memory.
Sensor 1 – 4
External sensors connected to sensor inputs 1 to 4 of this
unit I/O port
Activity detection CH1-4
To set the activity detection function builtin this unit,
click Activity detection. The Activity detection setting
page appears (see page 60).
Schedule
Click Schedule check to display the Image memory
Schedule setting page.
For setting the schedule, see "Setting the Schedule —
Schedule setting Page" on page 59.
Alarm buffer configuration
Click Alarm buffer to display the Alarm buffer setting
page.
For details, see "Setting the Alarm Buffer — Alarm
buffer setting Page" on page 57.
Note
If an alarm occurs during the Alarm buffer processing,
that alarm is ignored.
Digest viewer
If you select On, an HTML file (.html) and a Java Script
file (.js) are added each time the selected alarm is
detected.
When you open the added HTML file using a general
browser, the digest viewer runs and you can view the
still pictures in the alarm buffer in sequence (quasi-
animation).
See "Operating the Digest Viewer" on page 47.
OK/Cancel
See "Buttons common to every setting page" on page
27.
Periodical recording mode setting
Section
Channel Selection
Select the channel from which images are periodically
sent by e-mail.
The channel number is the same as the connector
number t1 to 4 to which the camera is connected on
this unit.
Interval time
Type the interval at which you want to record an image
periodically. You can set the hour (H), minutes (M) and
seconds (S) between 1 second and 24 hours (one day).
Notes
• The actual interval may be longer than the set value,
depending on the image size and the recording
conditions of the USB memory flash.
• When Video mode is set to MPEG4, 1 GOP (Group
of Pictures) of MPEG4 image will be recorded. This
means that the actual recording interval depends on
the I-picture interval setting (page 36). If you set I-
picture interval to 1 second and Interval time to 1
second, the image will be recorded at intervals of 2
seconds.
Schedule
Click Schedule check to display the Image memory
Schedule setting page.
For setting the schedule, see "Setting the Schedule —
Schedule setting Page" on page 59.
Recording Images in Memory — Image memory setting Page
55