Setting The Date And Time; Rebooting The Snt-V704 - Sony Ipela SNT-V704 User Manual

Setting the Date and Time

You can set the date and time on this unit.
1
Click the Date time tab to display the date/time
setting window.
2
Click to select the SNT-V704 you want to set the
date and time for.
You can select multiple cameras and set the date
and time simultaneously.
3
Select the date/time format from the Date time
format drop-down list.
4
Select the area where the SNT-V704 is installed
from the Time zone selecting drop-down list.
5
Set the date and time.
You can set the date and time in two ways.
Manual setting
Set the current date and time on the Manual current
date time setting boxes, and click OK. The setting
boxes are for the year (lower two digits), month,
date, hour, minutes and seconds from left to right.
Using the computer's date and time
The date and time set on the computer is displayed
in the PC current date time setting box.
Click OK on the right to set the date and time of
SNT-V704 to the displayed computer's date and
time.
64
Using the Supplied Setup Program
Note
Due to the network properties, there may be a slight
difference between the displayed computer's date and
time and those set on the SNT-V704.

Rebooting the SNT-V704

Click Reboot on the Network tab to reboot the SNT-
V704.
It will take about 40 to 60 seconds to reboot.