Table of Contents
Advertisement
Quick Links
Development Tool
Instruction manual
SCE CONFIDENTIAL
This manual contains safety precautions for the prevention of accidents,
and instructions for the use and handling of this product.
Read this manual carefully and use the product in a safe manner. After
reading the manual, store it in an accessible location for future reference.
DTP-T2000A
4-121-350-11(1)
Advertisement
Table of Contents
Related Manuals for Sony DTP-T2000A
Summary of Contents for Sony DTP-T2000A
- Page 1 This manual contains safety precautions for the prevention of accidents, and instructions for the use and handling of this product. Read this manual carefully and use the product in a safe manner. After reading the manual, store it in an accessible location for future reference. DTP-T2000A 4-121-350-11(1)
-
Page 2: Warning
WARNING reasonable protection against harmful interference when the WARNING equipment is operated in a commercial enviroment. This equipment generates, uses, and can radiate radio To avoid electrical shock, do not frequency energy and, if not installed and used in open the cabinet. Refer servicing to accordance with the instructions, may cause harmful interference to radio communications. -
Page 3: Important Safeguards
Important safeguards For your protection, please read these INSTALLATION safety instructions completely before operating the appliance, and keep this manual for future reference. Water and moisture Do not use the powerline operated unit near water – Carefully observe all warnings, for example, near a bathtub, washbowl, kitchen precautions and instructions on the sink, or laundry tub, in a wet basement or near a... - Page 4 Important safeguards SERVICE Damage requiring service Unplug the unit from the wall outlet and refer servicing to qualified service personnel under the following conditions: – When the power cord or plug is damaged or frayed. – If liquid has been spilled or objects have fallen onto the unit.
-
Page 5: Table Of Contents
Table of contents WARNING ................. 2 Important safeguards ............. 3 Precautions ................6 Chapter1 About this product ..............9 Overview Part names and usage ............10 System configuration example ..........14 Chapter2 Preparing to use Connecting to a network ............15 the unit Unit or accessories necessary for connecting ....... -
Page 6: Precautions
Precautions Safety This product has been designed with the highest concern for safety. However, any electrical device, if used improperly, has the potential for causing fire, electrical shock or personal injury. To help ensure accident-free operation, follow these guidelines. • Observe all warnings, precautions and instructions. •... - Page 7 Precautions AC adaptor and AC power cord use • To help ensure safe operation, during initial setup and regularly thereafter, inspect the AC adaptor and AC power cord. If damaged, stop use immediately and call the number on the back cover for assistance. •...
- Page 8 Precautions About radio frequency interference when using wireless LAN Aerial Separate by 80 cm Controller (31 in) or more SELECT START DRIVE SELECT POWER SYSTEM INIT NETWORK INIT CONTROLLER ON OFF When using the wireless LAN function, separate the unit's aerial and the controller by at least 80 centimeters (31 inches).
-
Page 9: Chapter1 Overview
Chapter Overview About this product This unit is equipped with features for the development of PSP software. The unit can download software or data from a local area network, allowing for the efficient debugging, running and checking of programs. • PSP features are provided for efficient software development. -
Page 10: Part Names And Usage
Part names and usage Unit front Turning the unit off (standby mode) • Press the on/standby button and hold it down for three seconds. The power indicator will flash and then turn solid orange, at which point the power will be turned off (and the system will enter standby mode). - Page 11 Part names and usage q; System initialize button qd Controller port While holding down this button, pressing the Connects with the commander interface on/standby button (1) returns the connector of the attached controller. communication processor software to the factory qf GPO indicator default initial state.
- Page 12 Part names and usage 9 RF (extension) connector qa DC IN 19.5V connector Connects to an access point using a coaxial cable. For attaching the included AC adaptor. q; Clamp For securing the aerial and AC adaptor to the unit. Controller front SELECT START...
- Page 13 Part names and usage Controller top WLAN 1 WLAN switch 2 USB connector Controller right 1 Power/hold switch Caution • For this product, the debugger (dstdb) reset command cannot be used when the power/hold switch of the controller is in the hold position.
-
Page 14: System Configuration Example
System configuration example The following accessories may be connected to the unit. Unit front To UMD drive USB device To Memory Stick Duo slot To USB connector DRIVE SELECT POWER SYSTEM INIT To USB NETWORK INIT CONTROLLER connector To DVD-ROM drive SELECT START To controller port... -
Page 15: Chapter2 Preparing To Use The Unit
Chapter Preparing to use the unit Connecting to a network The unit Unit or accessories Hub/Switch necessary for connecting The following devices and accessories are necessary in order to use this unit as a development machine: • Development Tool Controller •... -
Page 16: Connecting Peripherals
Connecting to a network Connecting to a network with a DHCP When using the unit in Europe, server Oceania and Korea Connect the unit and a development PC running Install the supplied RFI filter on the network the DHCP client software to a Hub/Switch on the cable (unshielded twisted pair cable). -
Page 17: Setting Up
Setting up Connecting to a network with a DHCP Information necessary for server setup Turn on the development PC. The following information is required for the setup of the unit. Configure the development PC. • DHCP server availability Run the DHCP client software and configure •... -
Page 18: Confirming Information Settings
Setting up Login Confirming information settings Log in with a user name and password. Confirm that the information below is displayed on the controller LCD: • IP Address • Subnet mask • Broadcast address • IP address of the default gateway •... -
Page 19: Setting Up
Setting up Setup Online help These options allow the user to modify settings, You can view the Help for the Administration update the software and shut down the unit. Tool. Administrator Change the administrator Setting up password password User password Change the user password Click on the items to the right of “Setup”... - Page 20 Setting up Date & time User password Upon clicking “Date & time”, the following Upon clicking “User password”, the following screen is displayed. This screen is used to screen is displayed. This screen is utilized to configure the date, time and time zone. change the user password used to log in to the system.
- Page 21 Setting up Update Upon clicking “Update”, the following screen is displayed. This screen is used to update the software required by the unit. Place the files to be updated in the appropriate directories on the development PC, and click “Update”. The following screen appears.
- Page 22 Setting up To save the unit’s settings on the Verify the contents of the files, and development PC: click “Setting”. The installation will begin. Right-click on “psptool.conf” and then select If the contents are incorrect, click “Back” to “Save Target As” or “Save Link As”. make corrections.
- Page 23 Setting up To deactivate access control: Self-diagnostic program Upon clicking “Self-diagnostic program”, the Select “Disable”, and click “Setting”. following screen is displayed. This screen is used This allows access from a PC that has been to perform a variety of self-diagnostic tests. configured with any IP address.
-
Page 24: Showing Status
Setting up Showing status Click on the items to the right of “Show status” to verify the settings. Network Upon clicking “Network”, the following screen is displayed. This screen allows the user to verify the unit's network settings. Shutdown Upon clicking “Shutdown”, the following screen is displayed. -
Page 25: Usage Notice
Setting up Access control Upon clicking “Access control”, the following screen is displayed. This screen lists the dsnet access control status and the IP addresses that have been granted access. This allows the user to verify this information. Usage notice For this product, the debugger (dstdb) reset command cannot be used when the power/hold switch of the controller is in the hold position. -
Page 26: Chapter3 Appendices
Chapter Appendices Troubleshooting The power does not turn on. Check that the AC adaptor and the AC power cord are securely connected. The unit cannot be accessed over the network while in use. Check that the power indicator lights up in green to verify that the unit is turned on. Check that the network cable is securely connected. - Page 27 Troubleshooting When network communications are functioning, you will see information like the following at a fixed interval: PING 192.168.0.10 (192.168.0.10): 56(84) data bytes 64 bytes from 192.168.0.10: icmp_seq=0 ttl=64 time=0.1 ms 64 bytes from 192.168.0.10: icmp_seq=1 ttl=64 time=0.1 ms 64 bytes from 192.168.0.10: icmp_seq=2 ttl=64 time=0.1 ms (continued below) When network communications are not functioning, the information will stop after the following:...
-
Page 28: Specifications
Specifications Main unit (DTP-T1000A Controller (DTP-H200) Dimensions (excluding protrusions) Compatible discs 170 x 72 x 19 mm (w/h/d) CD-ROM / CD-R / DVD-ROM / DVD-R / Weight (including the cable) Approx. 370 g Power Input voltage DC IN 19.5V AC adaptor (DTP-H100) Power consumption Operating environment Power... - Page 29 Specifications U.S. and foreign patents licensed from Dolby Laboratories. A portion of the PSP system software requires the following copyright notice: This software is based in part on the work of the Independent JPEG Group. Specifications...
-
Page 30: Limitations Of Liability
Sony Computer Entertainment Inc. or its affiliates. Other than as expressly set forth by SCEI and/or any of its affiliates, except to the extent prohibited by applicable laws, SCEI and/or any of its affiliates shall not be liable for any damages, including special, incidental or consequential damages, or fees arising out of the use or inability to use this product. - Page 32 ” and “UMD” are trademarks of Sony Computer Entertainment Inc. “SONY” and “ ” are registered trademarks and “Memory Stick Duo”, “Memory Stick PRO Duo” and “ ” are trademarks of Sony Corporation. © 2008 Sony Computer Entertainment Inc. All rights reserved. Printed in Japan...