Setting The Schedule - Schedule Setting Page; Schedule Setting Section - Sony Ipela SNT-V704 User Manual

TCP Transparent: When you select TCP, specify the
TCP port number on the TCP Port No. menu, and
you can send and receive data that is input to or
output from the external serial communication port.
You can check the connection to this unit using a
DOS command "telnet host name assigned port
number".
TCP port No.
When you select TCP on the Mode menu, type the port
number for the TCP port (TCP Generic Driver). Set a
port number other than Well-Known port numbers (0 to
1023).
Baud rate
Select the communication baud rate for the peripheral
device connected to the serial interface. You can select
from among the following baud rates:
115200, 57600, 38400, 19200, 9600, 4800, 2400, 1200,
600, 300, 110 (bps)
Parity bit
Select the parity bit for the peripheral device connected
to the serial interface: none, odd or even.
Character length
Select the character length for the peripheral device
connected to the serial interface: 7 or 8 (bits).
Stop bits
Select the stop bit for the peripheral device connected to
the serial interface: 1 or 2 (bits).
OK/Cancel
See "Buttons common to every setting page" on page
27.
Setting the Schedule
— Schedule setting Page
When you click Schedule on the Administrator menu,
the Schedule setting page appears.
Use this page to set up to nine schedules used for the
preset position function, Day/Night function, FTP client
function, SMTP function, Alarm out 1, 2, 3 or 4 function
and Image memory function.

Schedule setting Section

Menu Selection
Select the schedule to be set among from FTP, SMTP,
Image memory, Camera(Day/Night), Preset(Tour) and
Alarm out 1–4.
Available period
Select the available operation period of the selected
function.
Always: Periodical recording mode always functions.
Use scheduler: Periodical recording mode functions
according to the schedule selected on the Schedule No.
menu.
Schedule setting Section
Displayed when you select Use scheduler from
Available period.
Schedule No
Click to select the check box(es) 1 to 6 to select the
schedule to be set.
Setting the Schedule — Schedule setting Page
59