Image file name
Type the basic file name you want to assign to the image
to attach an E-mail. You can use up to 10 alphanumeric,
- (hyphen) and _ (underscore) for naming.
Suffix
Select the suffix to add to the file name.
None: No suffix is added. The basic file name is
assigned to the image to be sent via an E-mail.
Date/Time: The date/time suffix is added to the file
name.
The date/time suffix consists of lower two-digits of
year (2 digits), month (2 digits), date (2 digits), hour
(2 digits), minute (2 digits) and second (2 digits) ,
thus 12-digit number is added to the file name.
Sequence number: A consecutive number is added to
the basic file name. A number of up to 10 digits
between 0000000000 and 4294967295 is added to
the file name.
Sequence No. clear
Click Apply to reset the Sequence number suffix to 0.
Mode
Select the mode of the SMTP function.
Manual: Sends a still image attached to an E-mail
manually. After selecting Manual, click OK. The
SMTP function mode is set to Manual.
In this mode, when you click the
(Trigger)
button on the main viewer page, a still image is
captured and sent via an E-mail. (See “Controlling
the Application Manually” on page 24.)
Alarm: Sends a still image via an E-mail by
synchronizing with an external sensor input or the
built-in activity detection function. When you select
Alarm, the Alarm mode setting section appears (see
page 51).
Periodical sending: Sends a still image via an E-mail
periodically. When you select Periodical sending,
the Periodical sending mode setting section appears
(see page 51).
OK/Cancel
See “Buttons common to every setting page” on page
27.
Page 50