Image Control Section; Monitor Image Section; Zoom Bar - Sony Ipela SNT-V704 User Manual

Image Control Section

Monitor image display parts
You can select the image you want to monitor when two
or more cameras are connected to this unit. See
"Displaying the Monitor Images" on page 20.
Camera control parts
These parts are displayed when you click Control on the
menu section. You can operate the camera using these
parts.
See "Operating the Camera from the Image Control
Section (BRC-300, EVI-D100, EVI-D70, and cameras
not manufactured by Sony only)" on page 21.
Trigger control parts
These parts are displayed when you click Trigger on the
menu section. You can output a trigger using these parts.
See "Controlling the Application Manually" on page 24.
Notes
• The camera control parts and the trigger control parts
display different contents due to the connected
camera. They display the features only the camera is
equipped with.
• If the image control section does not work normally,
install or activate Java. For details, see "Java applet
viewer" on page 17.
Monitor image display parts
Camera control parts
Trigger control parts

Monitor Image Section

The image shot by the camera connected to this unit is
shown here.
Click Control on the menu section to allow panning,
tilting and zooming of the camera from the monitor
image.
See "Operating the Camera from the Monitor Image
(Only when the BRC-300, the EVI-D100 or the EVI-
D70 is connected with VISCA cable)" on page 23.
Notes
• When cables are connected to Video out 1 to 4
connectors (BNC type), the 75 ohms terminal is
automatically turned to off inside the camera. This is
why the video image turns whitish if 75 ohms is not
terminated in the connected equipment. This is not a
malfunction of the camera. When connecting to the
video out terminals, be sure to terminate 75 ohms in
the connected equipment.
• This camera receives the video signal in 720 × 480
(NTSC)/720 × 576 (PAL) format. Some cameras
output the video signal in a smaller size than 720 × 480
(NTSC)/720 × 576 (PAL). In this case, the image in
the monitor image section has a black border.
If you operate Pan, Tilt, or Zoom on with this image,
the black area is also affected. (See "Operating the
Camera from the Monitor Image (Only when the
BRC-300, the EVI-D100 or the EVI-D70 is connected
with VISCA cable)" on page 23.)

Zoom Bar

The zoom bar is displayed when you click Control on
the menu section. You can operate the optical zoom
using the zoom bar.
See "Zooming Using the Zoom Bar" on page 23.
Configuration of Main Viewer Page
19