Table of Contents
Advertisement
Configuring the System
– System setting Page
When you click System on the Administrator menu, the
System setting page appears.
Use this page to perform the principal settings of the
software.
System setting Section
Video in setting
Selects the camera connected to t 1 – 4 connector of
this unit from the drop-down list.
Select the camera series or the protocol used for the
camera.
The selectable options are as follows:
None: Select when no camera is connected.
SONY BRC-300
SONY EVI-D100
SONY EVI-D70
SONY SSC-DC590/DC690
Pelco-D (Spectra III)
Bosch Dome Control Code Protocol (Bi-phase)
BBV RS422 Telemetry Control Protocol (RS485
StarCard)
American Dynamics RS-422 Protocol
GE Digiplex Protocol
Honeywell VCL Protocol
Configuring the System – System setting Page
Others: Other cameras
Title bar name
Type a name to display on the title bar up to 32
characters.
Welcome text
Type a text to show on the welcome page, in HTML
format, up to 1,024 characters. Use the <BR> tag for a
line break. (A line break is equivalent to 2 characters.)
Serial No.
Displays the serial number of this unit.
Default URL
Select the homepage to be displayed when you enter the
IP address of this unit in the Address box of the browser.
To display the homepage built in this unit
Select /index.html.
To display your individual homepage
You can display the favorite homepage if you create it
using the CGI commands of this unit and store the
HTML file in a USB flash memory. In this case, change
the Default URL setting as follows:
1
Select User Setting.
2
Store the HTML file of the homepage you created
into a USB flash memory and attach it into the USB
connector of this unit.
3
Type the path of the homepage up to 64 characters.
USB (drv)
Displays the free memory space of the USB flash
memory attached into the USB connector.
Exclusive control mode
Limits the pan/tilt operation of the camera.
If you select Off, multiple users can pan/tilt the camera
at the same time. The operation by the user accessed
later has priority.
If you select On, only one user can pan/tilt the camera.
The period of operation allowed to one user is
determined by the Operation time setting. If a user tries
to operate the camera while another user is operating it,
the control right is limited according to the Operation
time and Maximum wait number settings.
Operation time
Sets the period that one user can operate the camera
exclusively, between 10 and 600 sec.
Page 28
Hide quick links:
Advertisement
Table of Contents
