Preparation; Connecting The Unit; Controllable Cameras - Sony Ipela SNT-V704 User Manual

Preparation

The Preparation section explains what the administrator
has to prepare for monitoring images after connection of
the unit.

Connecting the Unit

Controllable cameras

The SNT-V704 enables control of the following video
cameras or cameras using the following protocols.
x Cameras manufactured by Sony
BRC-300 series
EVI-D100 series
EVI-D70 series
SSC-DC590/DC690 series
x Cameras and camera protocols not manufactured by
Sony
Pelco-D (Spectra III)
Bosch Dome Control Code Protocol (Bi-phase)
BBV RS422 Telemetry Control Protocol (RS-485
StarCard)
American Dynamics RS-422 Protocol
GE Digiplex Protocol
Honeywell VCL Protocol
Each camera needs each setting. For details, see "Setting
the Camera" on page 31.
Connecting BRC-300, EVI-D100 and EVI-
D70 series
Up to four cameras can be connected to SNT-V704 at
the same time.
1
Connect the connector 1 to 4 of SNT-V704 and
t
the video output connector of each camera.
Note
When connecting cameras, connect from the t
connector 1 to 4 in order. If these are connected at
random, this unit may not work properly.
2
Connect VISCA RS-232C connectors of SNT-
V704 and each camera.
Refer also to the Instruction manuals of the camera
for connection of the camera.
8
Connecting the Unit
SNT-V704 (rear)
1 12
RS-232C 1 2 3
I/O
13 24
SEE INSTRUCTION MANUAL CLASS 2 WIRING DC 12V
BRC-300 series (rear)
BRC-300 series (rear)
BRC-300 series (rear)
BRC-300 series (rear)
4
75-ohm coaxial
cable (not supplied)
VISCA cable
(not supplied)
VISCA cable
(not supplied)
VISCA cable
(not supplied)