Setting The Activity Detection Function; Activity Detection Setting Page; Setting The Activity Detection Area - Sony Ipela SNT-V704 User Manual

Time table
For each schedule, specify Start time (hour and minutes)
and End time (hour and minutes), and check the days of
the week that you want to activate the function.
OK/Cancel
See "Buttons common to every setting page" on page
27.
60
Setting the Activity Detection Function — Activity detection setting Page
Setting the Activity
Detection Function

Activity detection setting Page

When you click Activity detection on the Administrator
menu, the Activity detection setting page appears.
Use this page to set up for the activity detection to link
various applications. You can set two activity detection
areas for each channel.

Setting the Activity Detection Area

Set the activity detection working area as follows:
1
Determine the view angle of the camera at which
you want to perform activity detection, using the
pan, tilt and zoom.
2
Click Activity detection on the Administrator
menu.
A still picture is captured and the Activity detection
setting page appears.
3
Select the channel where the activity detection
function is activated from CH1 to CH4.
4
Select Enable.
5
Select Area1.
6
Hold down the mouse left button and drag it
diagonally.
The portion marked with a red frame determines the
activity detection working area.
—