Configuring Snmp - ZyXEL Communications NBG4604 User Manual

• Set - Allows the manager to set values for object variables within an agent.
• Trap - Used by the agent to inform the manager of some events.

17.7.1 Configuring SNMP

To change your NBG4604's SNMP settings, click Management > Remote MGMT
> SNMP tab. The screen appears as shown. Use this screen to configure your
SNMP settings.
Figure 93 Management > Remote MGMT > SNMP
The following table describes the labels in this screen.
Table 64 Management > Remote MGMT > SNMP
LABEL
SNMP Settings
Server Port
Server Access
Secured Client
IP Address
NBG4604 User's Guide
DESCRIPTION
The SNMP agent listens on port 161 by default. If you change the SNMP
server port to a different number on the NBG4604, for example 8161,
then you must notify people who need to access the NBG4604 SNMP
agent to use the same port.
Select the interface(s) through which a computer may access the
NBG4604 using this service.
A secured client is a "trusted" computer that is allowed to access the
SNMP agent on the NBG4604.
Select All to allow any computer to access the SNMP agent.
Choose Selected to just allow the computer with the IP address that you
specify to access the SNMP agent.
Chapter 17 Remote Management
165