Chapter 3
Configuring the Cisco ATA for SCCP
Cisco ATA Web Configuration Page
Cisco ATA Web Configuration Page
You can use the Cisco ATA web configuration page in a non-TFTP configuration environment, or in a
TFTP configuration environment as a read-only record of individual customer parameters.
Figure 3-1
shows an example of the Cisco ATA web configuration page, which displays all configurable
parameters.
Do not use the web configuration page to attempt to change any values that you configured by means of
Note
the TFTP configuration file method. Whenever the Cisco ATA resets, it downloads its ata<macaddress>
configuration file or atadefault.cfg default configuration file from the TFTP server, and the values in
either of these files will overwrite the values of any corresponding parameters configured with the Web
configuration method.
Figure 3-1
Cisco ATA Web Configuration Page
You can access the web configuration page from any graphics-capable browser, such as
Microsoft Internet Explorer or Netscape. This provides easy initial access to the Cisco ATA
configuration within the administrator's private network.
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide for SCCP (version 3.0)
3-25
OL-4652-01