Staticnetmask; Dns1Ip - Cisco ATA186-I1 Administrator's Manual

Network Configuration Parameters
Voice Configuration Menu Access Code
2
Related Parameters
•
•
•

StaticNetMask

Description
Configure the statically assigned subnet mask using this parameter if the DHCP parameter is set to 0.
Value Type
IP address
Default
255.255.255.0
Voice Configuration Menu Access Code
10
Related Parameters
•
•
•

DNS1IP

Description
This parameter is for setting the primary domain name server (DNS) IP address, if the DHCP server does
not provide one. If DHCP provides DNS1IP (and if it is non-zero), this parameter overwrites the
DHCP-supplied value. You cannot specify a port parameter. The Cisco ATA uses the default DNS port
only.
Value Type
IP address
Default
0.0.0.0
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide for SCCP (version 3.0)
5-10
DHCP, page 5-8
StaticIp, page 5-9
StaticNetMask, page 5-10
DHCP, page 5-8
StaticIp, page 5-9
StaticRoute, page 5-9
Chapter 5 Parameters and Defaults
OL-4652-01