Creating A Cisco Ata Default Configuration File - Cisco ATA186-I1 Administrator's Manual

Chapter 3 Configuring the Cisco ATA for SCCP
Table 3-5
Configurable Features
SCCP Terminal-related Features
•
•
•
•
•
User Interface and TFTP Features
•
•
•
•
Packet Precedence Features
•
•
Polarity settings for FXS ports
Tone format: BusyTone, CallWaitTone
DialTone, DialTone2, ReorderTone, RingBackTone
and AlertTone parameters
Tone parameters—Using Network Locale option
versus using Cisco ATA tone parameters
Version control of Cisco ATA configuration file

Creating a Cisco ATA Default Configuration File

The Cisco ATA release-software zip files includes a file called atadefault.cfg, which is a binary file that
contains all the default parameters for the Cisco ATA. However, you likely will need to create your own
atadefault.cfg file to contain the default settings that you want Cisco ATAs in your environment to use.
For information on each configuration parameter, including all default values, see
"Parameters and Defaults."
Use the text file called sk_example.txt as a basis for creating your default file. The sk_example.txt file
is included in the software-release zip file and contains all default values. This file is shown without its
annotations in the
The following procedure illustrates how to create the Cisco ATA default configuration file, convert it to
the required binary format that the Cisco ATA can read, and store it on the TFTP server so that the
Cisco ATA will download it during the boot-up process:
OL-4652-01
Configurable Features and Related Parameters (continued)
Cisco CallManager 3.0 support
Cisco IOS Telephony Solution (ITS) support
Domain name in Cisco CallManager environment
Static Cisco CallManager configuration
Terminal FXS lines
User interface password
TFTP Configuration
TFTP Encryption key
Web configuration—enable/disable
Type of Service (ToS) configuration
802.1P Class of Service (Cos) Bit configuration
"Configuration Text File Template" section on page
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide for SCCP (version 3.0)
Configuring the Cisco ATA Using a TFTP Server
Related Parameters
SCCP Terminal-related Parameters
ConnectMode, page 5-21
•
ConnectMode, page 5-21
•
Domain, page 5-15
•
CA0orCM0 and CA1orCM1, page 5-12
•
EPID0orSID0 and EPID1orSID1, page
•
5-13
User Interface and TFTP Parameters
UIPassword, page 5-3
•
• UseTFTP, page 5-4, TftpURL, page
OpFlags, page 5-24
EncryptKey, page 5-6,
•
page 5-7
OpFlags, page 5-24
•
Packet Precedence Parameters
• TOS, page 5-25
VLANSetting, page 5-11
•
Polarity, page 5-19
Tone Configuration Parameters, page 5-26
ConnectMode, page 5-21—Bit 0
CFGID—Version Parameter for Cisco ATA
Configuration File, page 5-40
5-2.
5-4,
EncryptKeyEx,
Chapter 5,
3-9