Changing The Administrator Password; Configuring A Corporate Directory - Cisco 7935 - IP Conference Station VoIP Phone Administration Manual

Chapter 3 Configuration of the Cisco IP Conference Station 7935

Changing the Administrator Password

Timesaver
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7

Configuring a Corporate Directory

78-12727-03
Follow this procedure to change the administrator password.
You can also use the Cisco IP Conference Station 7935 Web Interface to change
options. See the "Web Interface" section on page
Press the Menu button.
Press the Up or Down scroll button to select Admin Setup.
Press the Select button.
Enter the administrator password. (The default administrator password is **#.)
Press the Enter softkey.
Press the Up or Down scroll button to select Change Passcode and then press the
Select button.
Use the dialing pad to enter the new password in the Passcode field.
a.
Use the < softkey to correct any mistakes.
Re-enter the new password in the Confirm field.
b.
Press the Save softkey to save the new password, or press the Cancel softkey to
exit without saving.
You can access a directory of employee names and phone numbers on the
IP Conference Station. Before users can access the directory, you must configure
the directory on Cisco CallManager.
Cisco IP Conference Station 7935 Administration Guide

Changing the Administrator Password

3-27.
3-21