Verifying System Settings - Cisco 7935 - IP Conference Station VoIP Phone Administration Manual

Verifying System Settings

Verifying System Settings
Timesaver
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
System Setting
Language
Local number
DHCP
Cisco IP Conference Station 7935 Administration Guide
3-2
The IP Conference Station contains detailed information about its current system
settings. This information is useful when troubleshooting or when making
changes to any system settings.
You can also use the Cisco IP Conference Station 7935 Web Interface to view
system settings. See the
Follow these steps to verify system settings:
Press the Menu button.
Press the Up or Down scroll button to select Admin Setup.
Press the Select button.
Enter the administrator password. (The default administrator password is **#.)
Press the Enter softkey.
Press the Up or Down scroll button to select System Info and then press the Select
button.
Press the Up or Down scroll button to scroll through the system information
described in the following table.
Description
Displays the language selection
for the IP Conference Station.
This is the local phone number
assigned to the
IP Conference Station.
Indicates whether DHCP is
enabled or disabled.
Chapter 3 Configuration of the Cisco IP Conference Station 7935
"Web Interface" section on page 3-27.
Usage Notes
English is the default language.
Conference calls are initiated
using this number.
DHCP is enabled by default. You
can disable DHCP through the
Admin Setup > Network Setup.
78-12727-03