Using Voice Messaging - Cisco 7902G - Unified IP Phone VoIP Phone Manual

Using Voice Messaging

Use the Messages button
Your company determines the voice message service that your phone system uses. For the most
Note
accurate and detailed information about using the voice message service, see the
documentation that came with it.
If you want to...
Set up your voice
message service
See if you have a new
voice message
Listen to your voice
messages
Cisco IP Phone 7902G for Cisco CallManager
to access your voice messages as outlined in the table below.
Then...
Press (Messages) and follow the voice instructions.
Your system administrator will provide you with a default password for
your voice message service. For security reasons, you should change your
default password as soon as possible.
Look at your phone for a steady red light on the handset.
Press (Messages) and follow the voice instructions.
Basic Call Handling
13