Basic Call Handling; Placing A Call; Answering A Call; Ending A Call - Cisco 7902G - Unified IP Phone VoIP Phone Manual

Basic Call Handling

This section covers basic call-handling tasks such as placing, answering, transferring, and conferencing
calls. The features you use to perform these tasks are standard and available on most phone systems.

Placing a Call

If you want to...
Place a call
Redial the most
recently dialed number
Speed dial a number

Answering a Call

If you want to...
Answer a call
Answer a priority call
Answer a priority call
when you are already
on a call

Ending a Call

To end a call, hang up the handset.
Cisco IP Phone 7902G for Cisco CallManager
Then...
Lift the handset and dial the number.
Lift the handset and press
Press and hold (for about 2 seconds) the number on your keypad that you
assigned as a speed dial number.
For information on setting up speed dial buttons, see the "Setting Up Speed
Dial Buttons" section on page 16.
Then...
Pick up the handset.
When you hear the special call waiting tone, answer the higher-priority
call.
For information on priority calls, see the "Prioritizing Critical Calls"
section on page 14.
When you hear the special call waiting tone, end an active call and
answer the higher-priority call.
For information on priority calls, see the "Prioritizing Critical Calls"
section on page 14.
(Redial).
Basic Call Handling
9