Speaker - HP 2710p - Compaq Business Notebook Maintenance And Service Manual

Hp compaq 2710p notebook pc - maintenance and service guide
Hide thumbs Also See for 2710p - Compaq Business Notebook:
Table of Contents

Advertisement

4.
Remove the Bluetooth module and cable (4) from the base enclosure.
Reverse this procedure to install the Bluetooth module.

Speaker

Description
Speaker
Before removing the speaker, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the following components:
a.
b.
c.
d.
e.
f.
60
Chapter 4 Removal and replacement procedures
Battery on page
Hard drive compartment cover (see
Keyboard (see
Keyboard on page
Rear plastic bezel (see
Top cover (see
Top cover on page
Audio connector board (see
Bluetooth module (see
39).
Hard drive on page
50)
Rear plastic bezel on page
54)
Audio connector board on page
Bluetooth module on page
Spare part number
454695-001
41)
52)
58)
59)

Advertisement

Table of Contents
loading

Table of Contents