Table of Contents
Advertisement
Speaker assembly
Description
Speaker assembly
Before removing the speaker assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Place the computer in "Battery Safe mode"
3.
Disconnect all external devices connected to the computer.
4.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
5.
Remove the following components:
a.
Service doors
b.
Hard drive
c.
Keyboard
d.
Top cover
Remove the speaker assembly:
1.
Position the top cover upside-down.
2.
Remove the 2 Phillips M2.0×6.0 screws (1) that secure the speaker assembly to the top cover.
3.
Remove the cable from the clips in the top cover (2).
(Service doors on page
(Hard drive on page
38)
(Keyboard on page
41)
(Top cover on page
45)
(Battery Safe mode on page
32).
Component replacement procedures
Spare part number
L00838-001
31).
51
Advertisement
Table of Contents
