Top Cover - HP 2710p - Compaq Business Notebook Maintenance And Service Manual

Top cover

Description
Top cover (includes LED board and cable and display alignment guides)
Before removing the top cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a.
b.
c.
Remove the top cover:
1. Turn the computer upside down, with the front toward you.
54 Chapter 4 Removal and replacement procedures
Battery on page
Hard drive compartment cover (see
Keyboard (see Keyboard on page
Rear plastic bezel (see
39).
Hard drive on page
50)
Rear plastic bezel on page
Spare part number
454683-001
41)
52)