Table of Contents
Advertisement
118
Communication
The digits zero to nine are permitted. The system detects no continuous digit
combinations such as twenty-three, but only individually spoken digits (two, three).
After each order of digits (separation through brief voice pause) the detected digits
are repeated.
Notes for entering the PIN code
When entering a PIN code with more than 8 digits, the system indicates "The
PIN is too long".
When entering an incorrect PIN code, the system indicates "The PIN is incor-
rect".
If the incorrect PIN code has been entered three times consecutively, the card
is blocked. With the aid of the personal unblocking code PUK (Personal Unblock
Key), the SIM card can be unblocked. The unblocking code can only be entered
via the phone keypad and not through the voice control.
Example for entering the PIN code
Voice command
ENTER PIN/PIN CODE
e.g. ZERO ONE TWO THREE
If no entry is put in, the following announcement is made after about 5 seconds.
STORE
You can interrupt the dialogue at any time by pressing the PTT button or with the
voice command CANCEL.
Dial number
– Press the PTT button.
– Give the command DIAL NUMBER after the signal tone.
Announcement
"The PIN please"
"Zero One Two Three"
"Possible commands are: store, repeat,
back, delete or more digits"
"The PIN is saved"
(end of dialogue)
After giving this command, the system requests the entry of a telephone number.
The telephone number can be entered as an interconnected spoken row of digits
(complete number), in the form of order of digits (separation through a brief voice
pause) or through individually spoken digits. After each order of digits (separation
through brief voice pause) the detected digits are repeated.
The digits zero to nine are permitted. The system detects no continuous digit
combinations such as twenty-three, but only individually spoken digits (two, three).
If you enter more than 20 digits, the system announces: "The number is too long".
Additionally for international calls a Plus (+) has to be entered in front of the 20
digits.
Example when entering a telephone number
Voice command
DIAL NUMBER
e.g. ZERO SIX ZERO THREE
If no entry is put in, the following announcement is made after about 5 seconds.
FIVE SEVEN TWO
DIAL
You can interrupt the dialogue at any time by pressing the PTT button or with the
voice command CANCEL.
Repeat last call
– Press the PTT button.
– Give the command REDIAL after the signal tone.
Announcement
"The number please"
"Zero Six Zero Three"
"Possible commands are: dial, repeat,
back, delete or more digits"
"Five Seven Two"
"The number is being dialed"
Advertisement
Table of Contents
