Table of Contents
Advertisement
The luggage compartment cover can be removed as required if one must
transport bulky goods.
– Unhook the support straps on the boot lid
– Slightly raise the luggage compartment cover.
– Remove the luggage compartment cover from the holder
pulling to the rear or with adequate blows to the bottom side of the
cover.
– Install again by pushing the luggage compartment cover forwards into
A
the holder
and hanging the support straps
2
The luggage compartment cover can also be put into the lower position on the
⇒ fig.
supporting elements
The procedure of installing or removing is identical.
The luggage compartment cover is foreseen for storage of small objects of up to 2.5
kg. in weight.
WARNING
No objects should be placed on the luggage compartment cover, the vehicle
occupants could be endangered if there is sudden braking or the vehicle
collides with something.
Using the system
Safety
Fig. 79 Luggage compart-
ment cover in the lower posi-
tion
A
⇒ page 72, fig.
1
A
on the boot lid.
1
79.
Driving Tips
Caution
Please ensure that the heating elements of the rear window heater are not
damaged as a result of objects placed in this area.
Note
When opening the boot lid, lift the luggage compartment cover - risk that objects
placed in this area can slip forward!
Static separation net*
78.
A
by
2
General Maintenance
Breakdown assistance
Seats and Storage
Fig. 80 Use of the static
separation net behind the
rear seats
Fig. 81 Use of the static
separation net behind the
front seats
Praktik
Technical Data
73
Advertisement
Table of Contents
