Table of Contents
Advertisement
Driving time
The driving time which has elapsed since the memory was last erased, appears in
the display ⇒ page 22. If you wish to calculate the driving time from a particular
time of day you must first erase the memory at this moment in time by pressing the
A
⇒ page 23, fig.
button
22.
B
The maximum time indicated in both switch positions is 99 hours and 59 minutes.
The indicator is set back to null if this period is exceeded.
Distance driven
The distance driven since the memory was last erased appears in the display
⇒ page 22. If you wish to calculate the distance driven from a particular time of day
you must first erase the memory at this moment in time by pressing the button
⇒ page 23, fig.
22.
The maximum distance indicated in both switch positions is 9 999 km. The indicator
is set back to null if this period is exceeded.
Average speed
The average speed since the memory was last erased is shown in the display in
km/hour ⇒ page 22. If you wish to determine the average speed over a certain
period of time you must first erase the memory at the start of the new measure-
A
⇒ page 23, fig.
ment using the button
B
A zero appears in the display for the first 100 m you drive after erasing the
memory.
Using the system
Safety
22.
Driving Tips
General Maintenance
Information display*
Introduction
A
B
The information display provides you with information in a convenient way
concerning the current operating state of your vehicle. The information system
also provides you with data (depending on the equipment installed in the vehicle)
relating to the radio, multi-functional indicator and navigation system.
Certain functions and operating conditions are always being checked on the
vehicle when the ignition is switched on and also while driving.
Functional faults, if required repair work and other information are indicated by red
symbols ⇒ page 27 and yellow symbols ⇒ page 28.
Lighting up of these symbols is combined with an acoustic warning signal.
Information and texts giving warnings are also shown in the display ⇒ page 29.
The display of text is possible in the following languages:
Czech, English, German, French, Italian, Spanish, Portuguese.
You can select the relevant language in the menu of the information display.
The following information can be shown in the display (depending on the equip-
ment installed on the vehicle):
Breakdown assistance
Instruments and Indicator/Warning Lights
Fig. 24 Instrument cluster:
Information display
Praktik
25
Technical Data
Advertisement
Table of Contents
