Table of Contents
Advertisement
64
Seats and Storage
Adjusting height of seat*
– Lift the seat if required by pulling or pumping lever
– Lower the seat if required by pushing or pumping lever
wards.
Adjust the angle of the seat backrest
– Relieve any pressure on the seat backrest (do not lean on it) and turn
A
the handwheel
to adjust the angle of the backrest.
3
The driver's seat should be adjusted in such a way that the pedals can be fully
pressed to the floor with slightly bent legs.
The seat backrest on the driver's seat should be adjusted in such a way that the
upper point of the steering wheel can be easily reached with slightly bent arms.
WARNING
Only adjust the driver seat when the vehicle is stationary - risk of injury!
Take care when adjusting the seat! Adjusting the seat without care can
lead to bruises or injuries.
The seat backrests must not be angled too far back when driving other-
wise this will affect proper operation of the seat belts and of the airbag
system - risk of injury!
Head restraints
A
upwards.
2
A
down-
2
Best protection is achieved if the top edge of the head restraint is at the
same level as the upper part of your head.
Adjusting the height of a head restraint
– Grasp the side of the head restraint with both hands and push the
head restraint in the direction of axle of the metal guide rods, in the
direction of arrow
Fig. 61 Adjusting head
restraint
Fig. 62 Removing a head
restraint
⇒ fig. 61
to the top or to the bottom.
Advertisement
Table of Contents
