Table of Contents

Advertisement

Lights and Visibility

Lights

Switching lights on and off
Switching on side lights
– Turn the light switch
Switching on the low beam and main beam
– Turn the light switch into position
Using the system
Safety
Fig. 46 Dash panel: Light
switch
Fig. 47 Fuse box: Switch for
daylight driving lights
⇒ fig. 46
into position
.
.
Driving Tips
– Press the main beam lever forward in order to switch on the main
⇒ page 56, fig.
beam
Switching off all lights
– Turn the light switch into position O.
Switching on daylight driving lights*
– Remove the cover of the fuse box on the left side of the dash panel
⇒ page 218.
– Turn the light switch into position O
– Switch on the switch for daylight driving lights
– After switching on the ignition, the parking and low beam lights are
switched on.
– After the engine start, the parking and low beam lights illuminate.
Switching off daylight driving lights*
– Switch off the switch for daylight driving lights
– Turn the light switch to the position side lights
⇒ fig.
46.
During the engine start, the parking and low beam lights are switched off automat-
ically.
On vehicles fitted with right-hand steering* the position of the switches differs to
some extent from the position shown on
switch positions are identical, however.
General Maintenance
Breakdown assistance
Lights and Visibility
51.
⇒ fig.
46.
⇒ fig.
47.
⇒ fig.
47.
or low beam
⇒ fig.
46. The symbols which mark the
Praktik
53
Technical Data

Advertisement

Table of Contents
loading

This manual is also suitable for:

Roomster

Table of Contents