Variable Loading Floor - Skoda ROOMSTER - 05-2009 Manual

74 Seats and Storage
Install the static separation net behind the front seats or the rear seats.
Install the static separation net behind the rear seats
– Remove the luggage compartment cover.
– Take the separation net out of the bag.
– Unfold both parts of the cross rod until they are heard to engage.
– Insert the cross rod into the mount
the cross rod forward. In the same way, fix the cross rod to the other
side of the vehicle, mount
A
– Hang the carabines at the ends of the strap into the lashing eyes
C
behind the rear seats.
– Pull the strap through the tensioning clasp, first of all on the one side
and then on the other side.
Remove the static separation net behind the rear seats
– Slacken the bands on both sides and take off the carabines
⇒ page 73, fig.
80.
– Push the cross rod first of all on the one side and then on the other
side towards the rear.
– Take the cross rod out of the mounts
Pack static separation net
– Press the red button of the joint
– Put the separation net folded together in the bag and close it.
– Attach the bag with the aid of the plastic carabines to the eyes on the
left and right luggage compartment trim panel.
Installing and removing the static separation net behind the front seats
fig. 81 is carried out analogously as behind the rear seats. Use the eyes behind the
A
first on the one side and push
B
A ⇒ page 73, fig.
80.
B
A
.
B
A
- so that it releases.
A
front seats to attach the carabines. Remove the rear seats to enlarge the luggage
compartment.
Installing and removing the static separation net behind the rear seats with variable
loading floor* ⇒ page 74 is carried out analogously as behind the rear seats
without variable loading floor. Use the lower eyes at the fixing wedges on the front
part of the variable loading floor in order to attach the carabines.

Variable loading floor*

Remove variable loading floor
A
C
⇒ page 73,
Fig. 82 Luggage compart-
ment: Fold up variable
loading floor
Fig. 83 Luggage compart-
ment: remove variable
loading floor