Layout; Scheduler; Duplex (2-Sided Printing) - Xerox Phaser 6115MFP User Manual

Layout

The Layout section is used to specify the page layout when printing and the setting for two-
sided printing.
1.
Pages per Sheet: Specifies the number of pages to be printed on one sheet of paper. For
example, if 2 is selected, two pages are printed on one sheet of paper.
2. Layout Direction: If you are printing more than one page per sheet, this specifies the
direction and order the pages should be arranged on each sheet of paper.
3. Border: This prints a border around the image for each of the pages printed on one sheet
of paper when more than one page is printed on one sheet of paper.
4. Two-Sided: Select the desired setting for two-sided printing when the optional duplex unit
is installed.
■ Off: Two-sided printing is not performed.
■ Long-edged Binding: Two-sided printing is performed with the binding along the
long edge of the paper.
■ Short-edged Binding: Two-sided printing is performed with the binding along the
short edge of the paper.

Scheduler

The Scheduler section is used to specify the timing and priority for printing jobs.
1. Print Document
■ Now: Select this option to begin printing immediately.
At: Specify the time to begin printing.
■
■ On Hold: Select this option to hold the print job.
2.
Priority: Select the priority for printing jobs that are being held.

Duplex (2-Sided Printing)

The Duplex section is used to specify whether the pages are to be printed on one-side or both
sides of the paper.
1. Print on Both Sides: Select this box to print on both sides of the paper.
■ Long-edged Binding: Two-sided printing is performed with the binding along the
long edge of the paper.
■ Short-edged Binding: Two-sided printing is performed with the binding along the
short edge of the paper.
Phaser® 6115MFP Multifunction Product
5-14
Specifying Print Settings