Loading Plain Paper - Xerox Phaser 6115MFP User Manual

Loading Plain Paper

Use plain paper that is:
■ Kept on a flat, level surface in its original wrapper until it is time to load it.
■ Suitable of laser printers, such as standard or recycled office paper.
■ Keep media between 35% and 85% relative humidity.
Do not use media that is:
Coated with a processed surface (such as carbon paper, digitally gloss-coated media,
■
and colored paper that has been treated.
■ Carbon backed
■ Iron-on transfer media (such as heat-sensitive paper, heat-pressure paper, and heat-
press transfer paper)
■ Cold-water-transfer paper
Pressure sensitive
■
■ Designed specifically for inkjet printers (such as superfine paper, glossy film, and
postcards)
■ Already printed on by another printer, copier or fax machine
Dusty, wet, or damp
■
■ Layered
■ Adhesive
■ Folded, creased, curled, embossed, warped, or wrinkled
■ Too slick, too coarse, or too textured.
■ Too thick or too thin
■ Composed of foil or gilt; too luminous or shiny
Heat sensitive or cannot withstand the fusing temperature (180
■
■ Irregularly shaped (not rectangle or not cut at right angles)
■ Attached with glue, tape, paper clips, staples, ribbons, hooks, or buttons
Acidic
■
■ Any media not supported by this product
Capacity
Orientation
Driver media type
Weight
2-Sided printing
(Duplexing)
Up to 200 sheets, depending on the paper weight
Tray 1
Up to 500 sheets, depending on the paper weight
Tray 2
Faceup
Plain paper
2
60 to 90 g/m (16 to 24 lb. Bond)
See 2-Sided Printing (Duplexing)
Phaser® 6115MFP Multifunction Product
6-6
Loading Media
o o
C [356
on page 6-28.
F])