Configuring Options
If you have options installed, you need to enable the options in the printer driver. Ensure the
option is installed correctly and the product is turned on before configuring the driver.
Enabling Options (Windows)
1.
Follow the instructions for displaying the printer driver, see
Settings
on page 5-2.
2.
Select the Device Options tab.
If your options are listed as Installed in the Device Options list, click OK.
■
■
If your options are listed as Not Installed, continue with the following steps.
3.
Clear the Auto Configure check box.
4.
Select the option (one at a time) from the list.
5.
Select Installed from the Settings drop-down list.
6.
Click Apply, and then click OK to exit.
Enabling Options (Macintosh)
1.
Use the Printer Setup Utility or Printer Center, and select Show Info from the Printers
menu.
2.
Click Name & Location from the drop-down list, and then select Installable Options
from the menu.
3.
Select the options installed on your product, and then click Apply Changes.
Phaser® 6115MFP Multifunction Product
5-3
Accessing the Printer Driver Settings
Accessing the Printer Driver