Configuring the Product
This section includes:
■
User Setup
on page 3-5
Setting the Auto Panel Reset
■
■
Changing the Energy Save Mode
■
Setting the LCD Contrast
Setting the Control Panel Language
■
■
Setting the Scanner Lamp Off Time
■
Setting the Speaker Volume
■
Setting the Control Panel Default Mode
■
Setting the Toner Out Action
■
Setting the Media Mismatch Behavior
■
Calibrating the Product
This section details general product configuration and setup. For Copy, Scan, and Fax
configurations and setup, see the appropriate section in this manual.
Note:
For a complete diagram of the control panel menus, print a Menu Map from the control
panel, or see
Control Panel Menus
User Setup
Using the Control Panel
1.
From the main screen, press the Menu/Select button.
2.
Using the Up Arrow or Down Arrow button, scroll to the
press the Menu/Select button.
3.
Set the following information within the
■
1 Country Setup
: Set the current date and time.
■
2 Date & Time
■
: Set the order of the month, day, and year.
3 Date Format
■
4 Default Zoom
■
5 User Fax Number
■
: Enter your user name for this product.
6 User Name
4.
Press the Menu/Select button after each entry.
5.
Press the Cancel/C button to exit.
on page 3-6
on page 3-7
on page 3-7
on page 3-8
on page 3-9
on page 3-9
on page 3-10
on page 3-11
on page 3-12
on page 3-13
on page 2-12.
User Setup
: Select your country.
: Set to inches or metric; based on paper sizes for your region.
: Enter your fax number for this product.
Phaser® 6115MFP Multifunction Product
3-5
Configuring the Product
menu, and then
User Setup
menu: