Manually Setting The Product's Ip Address - Xerox Phaser 6115MFP User Manual

Manually Setting the Product's IP Address

Note: Verify that your computer has a properly configured IP address for your network.
Contact your network administrator for more information. DNS must be disabled to manually
set the IP address.
If you are on a network without a DNS server, or in an environment where the network
administrator assigns product IP addresses, you can use this method to manually set the IP
address. Manually setting the IP address overrides DHCP and AutoIP settings. Alternatively, if
you are in a small office with a single PC and use a dialup modem connection, you can
manually set the IP address.
Using the Control Panel
1.
Press the
Menu/Select
2.
Using the Up Arrow or Down Arrow button, scroll to
Menu/Select button.
3.
Scroll to
TCP/IP Address
4.
Enter the IP Address using the numeric keypad.
5.
Press the Menu/Select button to save the IP address.
6.
Follow the above steps to set the
Using CentreWare IS
CentreWare IS provides a simple interface that enables you to manage, configure, and monitor
networked products from your desktop using an embedded web server.
1. Launch your web browser.
2. Enter the product's IP address in the browser's Address field (http://xxx.xxx.xxx.xxx).
3. Login with your administrator's password.
4. Click the Network tab.
5. From the TCP/IP drop-down list, select Enable.
6. Select Disable from the DHCP and AutoIP drop-down lists.
7. Enter or modify the network settings on the TCP/IP page, and then click Save Changes at
the bottom of the page.
Using Host Names with the Domain Name Service (DNS)
The product supports DNS through an embedded DNS resolver. The DNS resolver protocol
communicates with one or more DNS servers to resolve the IP address for a given host name
or the host name for a given IP address.
To use an IP host name for the product, the product administrator must configure one or more
DNS servers and a local DNS domain name space database. To set up the printer for DNS,
supply a maximum of two DNS name server IP addresses.
Methods of Setting the Product's IP Address
button.
, and then press the Menu/Select button.
Subnet Mask
Phaser® 6115MFP Multifunction Product
4-8
, and then press the
Network Setup
and addresses, if necessary.
Gateway